| No | Equipment | Function |
| 1 | Spiral Flow Tester | Check on material flow rate |
| 2 | Laboratory Mixer | Sample batch equipment |
| 3 | Izod Impact strength equipment | Check Impact Strength |
| 4 | Electronic Caliper | Check part dimension |
| 5 | 3 kg kneading machine | Sample batch equipment |
| 6 | Electronic Densimeter | Density and Specific Gravity |
| 7 | Electronic Analytical Balance | Material Weighting |
| 8 | Oven | Temparature testing |
| 9 | Digital Micrometer | Check part dimension |
| 10 | Digital Caliper | Check part dimension |
| 11 | Temparature Recorder | Check temparature |
| 12 | Transfer moldign machine | Mold test speciment |
| 13 | Reactor and Hotplate Equipment | Check material reaction temparature, gel time and curing time |
| 14 | Digital Viscometer equipment | Check BMC material viscosity (high viscosity) |
| 15 | Dial Viscometer equipment | Check raw material (resin) viscosity.(low viscosity) |
| 16 | Controllable Water Bath | Control material temparature for testing |
| 17 | Magnifier | Check part dimension |
| 18 | Hardness tester ( Shore-D) | Check part hardness |
| 19 | Dielectric Strength Equipment (up to 100KV) | Check dielectric strength |
| 20 | Universal Testing machine | Check on compression, tensile, flexural strength and modulus |
| 21 | High Power Microscope Vision Measurement Systems | Check part dimension |
| 22 | Digital Izod/Charpy (GT-7045-MDL) | Check Izod and Charpy Strength |
| 23 | Surface Resistance (Hioki) | Check Surface Resitivity |
| 24 | Volume Resistance (Hioki) | Check Volume Resitivity |
| 25 | Melt Flow Index (GT-7100-MIB) | Check Melt Flow Index |
| 26 | Contherm Oven (Scientific Ltd) | Material Analysis |
| 27 | HDT (GT-HV200R or C6) | Heat Distortion Temparature |
| 28 | CMM | Brown & Sharpe |
| 29 | Smartscope | OGP |
|
| ||
|
| ||
|
| ||
|
| ||
|
| ||
|
| ||
|
| ||
|
| ||
|
